LatchFlow System™ - 20ml Dispenser + 120ml Pouch

Designed for at-breast supplementation, the Haakaa LatchFlow System™ helps your baby receive additional milk while remaining at the breast. The dual-layer silicone nipple shield guides supplemental milk toward the nipple while maintaining close skin-to-skin contact.

This set includes a 120ml pouch and a 20ml dispenser for different feeding stages. Use the soft dispenser for smaller, precisely controlled feeds, or the larger pouch when more milk is needed. The system supports direct-tube and nipple-shield-assisted feeding.

Size guide: S: 17mm shield opening (recommended nipple size 13-16mm); M: 20mm (16-19mm); L: 24mm (19-23mm).

• Supports direct-tube and nipple-shield-assisted at-breast supplementation.
• Helps maintain breastfeeding and skin-to-skin contact.
• Double-layer medical-grade silicone shield with built-in milk channels.
• Ultra-thin cut-out shape for closer contact.
• Includes a 120ml pouch and 20ml dispenser for different feeding quantities.
• Flow controllers and extension tubes support adjustable, flexible feeding.
• Includes a shape-retaining tray and storage case.
• Dishwasher, steriliser and boiling-water safe, except the cleaning brush.
• BPA and phthalate-free.

1. Clean your hands and all product parts. Fill the pouch or dispenser with supplemental milk without overfilling.
2. Assemble the connector and tubing securely, then set the flow controller to the slowest setting.
3. For direct-tube feeding, position the tube approximately 0.5cm from the nipple, secure it with medical tape and place the end in baby’s mouth.
4. For shield feeding, turn the shield brim upward, moisten the underside, centre it over the nipple and press the brim back against the skin.
5. Latch baby and adjust the flow gently as needed. Never squeeze the milk source forcefully.

Before first use, boil silicone parts in water for 5 minutes and plastic parts for 2–3 minutes. Clean after each use. Flush tubing with warm, soapy water and rinse thoroughly. Hand washing with soft-bristled brushes or soft sponges is recommended. The cleaning brush is not suitable for microwaves, sterilisers or boiling water. Do not use bleach-based agents, sterilising tablets or UV sterilisers. Allow all parts to air dry completely and store in a cool, dry place.

• Adult supervision is required at all times.
• Check milk temperature and flow before and during feeding.
• Inspect all parts before every use and replace immediately if damaged.
• Keep small parts and tubing out of reach of children when not in use and avoid any strangulation risk.
• For single-user use only.
• Prolonged sucking of fluids may cause tooth decay.
• Replace the nipple shield regularly and use only under the guidance of a lactation professional.
• Do not microwave. Use only compatible 3.8mm components.
• Do not squeeze the milk source forcefully. The cap is not leakproof; do not overfill.

View our Product Manual